Step 15 of 15
BAGGEBO 34×30×116 step 15 of 15: Lay in the glass shelves and close the door
Angle each of the 2 tempered glass shelves in through the open front of the cabinet and lower them onto the 8 rubber-sleeved shelf support screws (10077854), then swing the glass door shut.
- 2× Glass shelf
Tools: none, just your hands
All 15 steps
- 1 Screw in the feet and stand the side frames
- 2 Push down the bottom panel
- 3 Fit the top panel
- 4 Place the left side panel
- 5 Screw in the left shelf supports
- 6 Lock the left side panel with snap pins
- 7 Fit the right side panel and shelf supports
- 8 Lock the right side panel with snap pins
- 9 Attach the back panel
- 10 Level the cabinet against the wall
- 11 Anchor the cabinet to the wall common mistake
- 12 Screw the knob onto the glass door
- 13 Insert the lower door pivot pin
- 14 Hang the glass door
- 15 Lay in the glass shelves and close the door
00Overall
The outer size is IKEA's published size.
01Elevations
Drawn from our 3D model, to scale. Point at a part to find it in the list below; click it to jump there.
02Parts / cut list
| Part | Name | Qty | T | W | L | Material |
|---|---|---|---|---|---|---|
| A | Side frameA welded frame of 16 mm square steel tube with a bottom crossbar near the floor and a top crossbar at the top.16 × 300 × 1136 mm | ×2 | 16 mm | 300 mm | 1136 mm | Steel, epoxy/polyester powder coating |
| B | Bottom panelBent sheet-steel bottom tray that locks the two side frames together near the foot of the cabinet.16 × 296 × 306 mm | ×1 | 16 mm | 296 mm | 306 mm | Steel, epoxy/polyester powder coating |
| C | Top panelBent sheet-steel top tray that caps the two side frames.18 × 300 × 340 mm | ×1 | 18 mm | 300 mm | 340 mm | Steel, epoxy/polyester powder coating |
| D | Side panelPerforated white steel mesh panel that sits inside the side frame and carries the shelf-support screws.12 × 264 × 1016 mm | ×2 | 12 mm | 264 mm | 1016 mm | Steel, epoxy/polyester powder coating |
| E | Back panelWhite sheet-steel back panel with a central wall-anchoring hole near the top.4 × 336 × 1044 mm | ×1 | 4 mm | 336 mm | 1044 mm | Steel, epoxy/polyester powder coating |
| F | Glass doorTempered glass pane in a white powder-coated steel frame, hinged on the left.12 × 300 × 1008 mm | ×1 | 12 mm | 300 mm | 1008 mm | Steel, tempered glass, epoxy/polyester powder coating |
| G | Glass shelfTempered glass shelf (part 10077005) resting on 4 white rubber-sleeved screws inside the cabinet; holds up to 5 kg.5 × 256 × 296 mm | ×2 | 5 mm | 256 mm | 296 mm | Tempered glass |
The parts' sizes are our 3D model's own estimates: close, not measured. The outer dimensions, package weight, shelf load and fastener specs are IKEA’s; the tube section and shelf heights are close estimates. IKEA publishes only the outer size.
03Tools & materials
| Tools | ||
|---|---|---|
| Cross-head screwdriverDrives the 8 sleeved shelf-support screws (10077854), the wall screw, the knob screw (118832) and the top door pivot screw (10077255). | You need it | |
| Spirit levelLaid across the top panel in step 10 while the 4 adjustable feet (10003068) are turned to level the cabinet against the wall. | You need it | |
| Materials | ||
| Steel, epoxy/polyester powder coating | ABCDE | |
| Steel, tempered glass, epoxy/polyester powder coating | F | |
| Tempered glass | G | |
Not in the box: 1 wall screw and 1 wall plug suited to your wall.
04Hardware
| ×4 | Adjustable foot | 10003068 | M5 × 20 mm, 11.5 mm base | Grey polypropylene and zinc-plated steel |
| ×8 | Shelf support screw | 10077854 | M5 × 6 mm, 8 × 14 mm sleeve | Zinc-plated steel and white rubber |
| ×12 | Snap sleeve | 10050917 | 3 × 6 mm, 10 mm flange | White polycarbonate |
| ×12 | Snap pin | 10050916 | 5.2 × 5.6 mm | White plastic |
| ×1 | Distance plate | 114664 | 19 × 19 × 6 mm folded | Black polypropylene |
| ×1 | Washer | 126916 | 6.4 × 25 × 1 mm | Pre-galvanized steel |
| ×1 | Cover cap | 133303 | 28 × 28 × 7 mm | White polypropylene |
| ×1 | Knob | 10062514 | 20.5 × 27 mm, M4 insert | White polypropylene |
| ×1 | Knob screw | 118832 | M4 × 20 mm | Zinc-plated steel |
| ×1 | Door pivot pin | 10077811 | 4.6 / 10 × 14 mm | Zinc-plated steel |
| ×1 | Door pivot screw | 10077255 | M6 × 21 mm, 4.6 × 9 mm tip | Zinc-plated steel |
Questions
Does the BAGGEBO glass-door cabinet have to be anchored to the wall?
Yes. At 116 cm tall and 30 cm deep, it can tip forward when the door is opened if it is not fixed to the wall. The box includes the folding black distance plate (114664), galvanized washer (126916) and white cover cap (133303); you supply a screw and wall plug suited to your wall.
What tools do I need to assemble the BAGGEBO glass-door cabinet?
You need a cross-head screwdriver (for the 8 shelf-support screws 10077854, the knob screw 118832, the top door pivot screw 10077255, and the wall screw) and a spirit level to level the cabinet on its 4 adjustable feet (10003068). The 12 snap sleeves (10050917) and 12 snap pins (10050916) push in by hand.
How do the two-piece plastic snap rivets (10050917 and 10050916) work?
First push the flanged hollow sleeve (10050917) into the corner hole so its flange sits flat against the panel, then press the pin (10050916) into the centre of the sleeve until it clicks. To remove one later, prise the pin back out first.
How much weight can each BAGGEBO glass shelf hold?
IKEA rates each tempered glass shelf (part 10077005) for a maximum load of 5 kg, resting on 4 rubber-sleeved shelf support screws (10077854).
Safety
Furniture that tips over can cause serious or fatal crushing injuries. IKEA says this cabinet must be fixed to the wall using the enclosed wall-anchoring fittings and a screw and plug suited to your wall.
About this guide
This is an independent 3D engineering guide modeled from physical hardware specifications and standard fastener part numbers so you can identify your pieces before building. The outer size, 34 × 30 × 116 cm, is IKEA's published size. The outer dimensions, package weight, shelf load and fastener specs are IKEA’s; the tube section and shelf heights are close estimates. The 3D runs faster than real hands do.
Each tempered glass shelf holds up to 5 kg, according to IKEA.
The manufacturer's instructions are on IKEA's product page (PDF). If something here differs from the manual in your box, follow the manual.
The 3D models, drawings and text are our own. IKEA and BAGGEBO are named only to say which product this guide is for.