Part number
10077854 Shelf support screw
Driven with a cross-head screwdriver through the front and back flanges of each side panel into the side frames at the two shelf heights; the 2 glass shelves rest on their white rubber sleeves.
Quick size & thread spec
- Length
- 20 mm · ¹³⁄₁₆″
- Diameter
- 8 mm · ⁵⁄₁₆″
- Thread
- Metric, M5
- Drive
- PZ2
- Material
- Zinc-plated steel
1:1 On-Screen Screw & Part Sizer
1:1 SCALEHold your physical screw or dowel flat against the screen to verify length and thread diameter.
Length: 20 mm Ø Diameter: 8 mm
- In the box
- 8 with the IKEA BAGGEBO 34×30×116
Lost or broke part 10077854?
Ask IKEA for spare part 10077854, naming the product it is for. IKEA’s UK site says small spare parts such as screws, knobs or plugs can be ordered free online; elsewhere, look under Customer service, then Spare parts, on your country’s IKEA site, or ask at a store’s customer service desk.
Where it goes
Commonly used in
IKEA furniture series that use this part:
- BAGGEBO
Fitting it
Start the screw by hand so it goes in straight, then drive it with the tool the manual shows: a cross-head screwdriver for a cross, a flat one for a slot, the hex key for a hex socket. Stop as soon as its head sits snug, as one more turn can strip a hole in particleboard. A drill-driver is too strong for most flat-pack screws.
Taking it out
Turn it anticlockwise with the same tool. A head whose cross has worn round can still be gripped with a rubber band pressed between it and the screwdriver. A hole that no longer grips can take a glued wooden dowel, left to dry and drilled again.
Other screws on iFlatpack
100086Long screw IKEA MICKE100181Socket screw M6 × 16 mm · IKEA IDÅSEN100214Long screw IKEA HEMNES, IKEA IVAR, IKEA RAST, IKEA TROFAST100215Long screw IKEA BEKVÄM100229Screw IKEA TROFAST100344Euro screw 13 mm long, 6 mm across, 10 mm head · IKEA IVAR100347Screw IKEA HEMNES, IKEA BISSA, IKEA HEMNES100349Screw IKEA HEMNES, IKEA TROFAST100365Screw IKEA MALM, IKEA MICKE100372Short screw 17 × 5 mm · IKEA KALLAX, IKEA KALLAX, IKEA LACK100402Connecting screw M4 × 18 mm · IKEA PAX100404Machine screw M4, 10 mm long · IKEA IVAR
Questions about part 10077854
What size is screw 10077854?
Part 10077854 is a shelf support screw: 8 × 20 mm (⁵⁄₁₆ × ¹³⁄₁₆″), metric, M5, PZ2 drive.
What tool fits part 10077854?
Part 10077854 has a PZ2 drive: use a PZ2 (Pozidriv) screwdriver or bit. Our guides drive it with a cross-head screwdriver.
Which furniture models use part 10077854?
Part 10077854 is used in IKEA BAGGEBO.