Step by step RIGGAclothes rack
Step5/9
Hardware in0/12
Parts in0/9
Open IKEA PDF ↗
Lay it on its castors and tightenstep 5 of 9 · manual page 5

iFlatpack.com is an independent platform creating original 3D procedural instructions. We are not affiliated with, endorsed by, or sponsored by Inter IKEA Systems B.V. or any other brand mentioned. All product names and part numbers are used strictly for identification and compatibility purposes.

Step 5 of 9 · IKEA manual page 5

RIGGA clothes rack step 5 of 9: Lay it on its castors and tighten

Tip the base back down onto its four castors. Tighten all four connectors with the hex key (108490), until their heads sit flush in the feet.

Tools: Hex key (108490, in the box)

All 9 steps

  1. 1Screw two shoe bars to a foot
  2. 2Stand it on the foot and add the plain bars
  3. 3Lay the other foot on the bars
  4. 4Screw the bars to the second foot common mistake
  5. 5Lay it on its castors and tighten
  6. 6Put the uprights over their sockets
  7. 7Bolt the uprights to the feet
  8. 8Screw the rail onto the uprights
  9. 9Set the rail’s height

Parts and hardware checklist

2×Footabout 51.4×16×2.6 cm
4×Shoe barabout 93.8×1.6×1.6 cm
2×Uprightabout 96.8×2.5×2.5 cm
1×Railabout 111×2.5×2.5 cm
1×Hex key#108490 · 5 mm
6×Connector#10084881
2×Bolt#10003302
2×Sleeve nut#106498
2×Plastic insert#128998

Tools you need

None: it goes together by hand.

Questions

What tools do I need for the RIGGA clothes rack?

Only the hex key (108490) in the box. The first connectors are turned in by hand and tightened with it later.

Which shoe bars go on first?

The two with a thread in their ends: the connectors screw into them. The two plain ones push into the slots in the feet once the first foot lies on the rug.

How do I change the height?

Press the button on an upright, slide its inner tube to another hole and let the button click in; set the other upright to the same hole, so the rail is level.

How much can the RIGGA hold?

IKEA gives a maximum load of 35 kg in all.

Safety

The manual warns that the rack can tip over: move it gently, and keep its load within 35 kg.

About this guide

The steps, the part numbers, the counts and the order come from IKEA's assembly manual AA-712786-6 (2021-08-25). The outer size, 111 × 51 × 126–175 cm, is IKEA's published size. The length, depth, the six heights and the shoe bars’ height are IKEA’s, the hex key’s size a spare-parts seller’s; the tubes, the castors and where the holes are, are read off the manual’s drawings and IKEA’s photos, so they are close, not measured. The 3D runs faster than real hands do.

IKEA gives the rack a maximum load of 35 kg in all.

The manufacturer's instructions are on IKEA's product page (PDF). If something here differs from the manual in your box, follow the manual.

The 3D models, drawings and text are our own. IKEA and RIGGA are named only to say which product this guide is for.