`190419` Screw

Flanged button-head M5 × 8 mm machine screw with a 3 mm hex socket and pointed tip. Start all 16 loosely through the trays’ end rims into the two side frames in steps 5 and 6, then tighten them firmly in step 7.

Quick size & thread spec

Length: 8 mm · ⁵⁄₁₆″
Diameter: 5 mm · ³⁄₁₆″
Head diameter: 11 mm · ⁷⁄₁₆″
Thread: Metric, M5
Drive: hex key, 3 mm
Material: Steel

1:1 On-Screen Screw & Part Sizer

1:1 SCALE

Hold your physical screw or dowel flat against the screen to verify length and thread diameter.

08 mm

Ø 5 mm

Length: 8 mm Ø Diameter: 5 mm Head diameter: 11 mm

Calibrate phone screen width: 65 mm

Standard phone: 65 mm · Max / Ultra: 72 mm

Get a replacement kit ↗Search Amazon for compatible replacement hardware kits Find exact part #190419 on eBay ↗

Note: it may be 190419 or 10051663
In the box: 16 with the IKEA NISSAFORS trolley

Lost or broke part 190419?

Ask IKEA for spare part 190419, naming the product it is for. IKEA’s UK site says small spare parts such as screws, knobs or plugs can be ordered free online; elsewhere, look under Customer service, then Spare parts, on your country’s IKEA site, or ask at a store’s customer service desk.

IKEA UK spare parts ↗ IKEA US spare parts ↗

Where it goes

IKEA NISSAFORS trolley 16 in the box, in 2 steps
1. Step 5: Stand the three trays on the first side frame and start 8 screws
2. Step 6: Fit the second side frame, turn over and start 8 screws

Commonly used in

IKEA furniture series that use this part:

NISSAFORS

Fitting it

Start the screw by hand so it goes in straight, then drive it with the tool the manual shows: a cross-head screwdriver for a cross, a flat one for a slot, the hex key for a hex socket. Stop as soon as its head sits snug, as one more turn can strip a hole in particleboard. A drill-driver is too strong for most flat-pack screws.

Taking it out

Turn it anticlockwise with the same tool. A head whose cross has worn round can still be gripped with a rubber band pressed between it and the screwdriver. A hole that no longer grips can take a glued wooden dowel, left to dry and drilled again.

Other screws on iFlatpack

100086 Long screw IKEA MICKE
100181 Socket screw M6 × 16 mm · IKEA IDÅSEN
100214 Long screw IKEA HEMNES, IKEA IVAR, IKEA RAST, IKEA TROFAST
100215 Long screw IKEA BEKVÄM
100229 Screw IKEA TROFAST
100344 Euro screw 13 mm long, 6 mm across, 10 mm head · IKEA IVAR
100347 Screw IKEA HEMNES, IKEA BISSA, IKEA HEMNES
100349 Screw IKEA HEMNES, IKEA TROFAST
100365 Screw IKEA MALM, IKEA MICKE
100372 Short screw 17 × 5 mm · IKEA KALLAX, IKEA KALLAX, IKEA LACK
100402 Connecting screw M4 × 18 mm · IKEA PAX
100404 Machine screw M4, 10 mm long · IKEA IVAR

55 more in the Part Finder

Questions about part 190419

What size is screw 190419?

Part 190419 is a screw: 5 × 8 mm (³⁄₁₆ × ⁵⁄₁₆″), head diameter 11 mm, metric, M5, hex key, 3 mm drive.

What tool fits part 190419?

Part 190419 has a hex 3 mm drive: use a 3 mm hex key. Our guides drive it with the hex key 190094.

Which furniture models use part 190419?

Part 190419 is used in IKEA NISSAFORS.

190419 Screw