Part number
10042206 Screw
A black flanged button-head M6 × 12 mm machine screw with a 4 mm hex socket (the grey BROR uses 10044730). Two go through each corner of a post and rim into a corner bracket: leave them slightly loose until step 6.
Quick size & thread spec
- Length
- 12 mm · ½″
- Diameter
- 6 mm · ¼″
- Thread
- Metric, M6
- Drive
- hex key, 4 mm
- Material
- Steel
1:1 On-Screen Screw & Part Sizer
1:1 SCALEHold your physical screw or dowel flat against the screen to verify length and thread diameter.
Length: 12 mm Ø Diameter: 6 mm
- In the box
- 24 with the IKEA BROR work bench 110×55
Lost or broke part 10042206?
Ask IKEA for spare part 10042206, naming the product it is for. IKEA’s UK site says small spare parts such as screws, knobs or plugs can be ordered free online; elsewhere, look under Customer service, then Spare parts, on your country’s IKEA site, or ask at a store’s customer service desk.
Where it goes
Commonly used in
IKEA furniture series that use this part:
- BROR
Fitting it
Start the screw by hand so it goes in straight, then drive it with the tool the manual shows: a cross-head screwdriver for a cross, a flat one for a slot, the hex key for a hex socket. Stop as soon as its head sits snug, as one more turn can strip a hole in particleboard. A drill-driver is too strong for most flat-pack screws.
Taking it out
Turn it anticlockwise with the same tool. A head whose cross has worn round can still be gripped with a rubber band pressed between it and the screwdriver. A hole that no longer grips can take a glued wooden dowel, left to dry and drilled again.
Other screws on iFlatpack
100086Long screw IKEA MICKE100181Socket screw M6 × 16 mm · IKEA IDÅSEN100214Long screw IKEA HEMNES, IKEA IVAR, IKEA RAST, IKEA TROFAST100215Long screw IKEA BEKVÄM100229Screw IKEA TROFAST100344Euro screw 13 mm long, 6 mm across, 10 mm head · IKEA IVAR100347Screw IKEA HEMNES, IKEA BISSA, IKEA HEMNES100349Screw IKEA HEMNES, IKEA TROFAST100365Screw IKEA MALM, IKEA MICKE100372Short screw 17 × 5 mm · IKEA KALLAX, IKEA KALLAX, IKEA LACK100402Connecting screw M4 × 18 mm · IKEA PAX100404Machine screw M4, 10 mm long · IKEA IVAR
Questions about part 10042206
What size is screw 10042206?
Part 10042206 is a screw: 6 × 12 mm (¼ × ½″), metric, M6, hex key, 4 mm drive.
What tool fits part 10042206?
Part 10042206 has a hex 4 mm drive: use a 4 mm hex key. Our guides drive it with the hex key 100092.
Which furniture models use part 10042206?
Part 10042206 is used in IKEA BROR.