`10005471` Snap sleeve

Hollow flanged expanding sleeve pushed into the 6 perimeter holes of each mesh bottom (2 at the short ends in step 2, 4 along the long sides in step 4) before the snap pin (10005485) clicks in.

Quick size & thread spec

Length: 5.6 mm · ¼″
Diameter: 5.2 mm · ³⁄₁₆″
Head diameter: 7.7 mm · ⁵⁄₁₆″
Tool: by hand
Material: Plastic

1:1 On-Screen Screw & Part Sizer

1:1 SCALE

Hold your physical screw or dowel flat against the screen to verify length and thread diameter.

05.6 mm

Ø 5.2 mm

Length: 5.6 mm Ø Diameter: 5.2 mm Head diameter: 7.7 mm

Calibrate phone screen width: 65 mm

Standard phone: 65 mm · Max / Ultra: 72 mm

Get a replacement kit ↗Search Amazon for compatible replacement hardware kits Find exact part #10005471 on eBay ↗

Note: colour variants use 10050916, 10049406, 10090669, 10116053, 10116025, 10125545 or 10166525
In the box: 18 with the IKEA NISSAFORS trolley

Lost or broke part 10005471?

Ask IKEA for spare part 10005471, naming the product it is for. IKEA’s UK site says small spare parts such as screws, knobs or plugs can be ordered free online; elsewhere, look under Customer service, then Spare parts, on your country’s IKEA site, or ask at a store’s customer service desk.

IKEA UK spare parts ↗ IKEA US spare parts ↗

Where it goes

IKEA NISSAFORS trolley 18 in the box, in 2 steps
1. Step 2: Lock the short end rims with 6 snap sleeves and pins
2. Step 4: Lock the long side rims with 12 snap sleeves and pins

Commonly used in

IKEA furniture series that use this part:

NISSAFORS

Fitting it

Fit it as the manual shows, in the steps listed above.

Taking it out

To take it out, follow those steps the other way round.

Other parts on iFlatpack

10005485 Snap pin Ø 3 × 6 mm, 10 mm head · IKEA NISSAFORS
10040242 Drawer bottom holder IKEA VIHALS
10042543 Back holder, top 38 × 18 × 31 mm · IKEA PAX
10046278 Back holder, bottom 26.3 × 17.5 mm · IKEA PAX
10050769 Snap sleeve 32 × 10.2 mm · IKEA VIHALS
10050771 Snap pin 33.5 × 4.6 mm · IKEA VIHALS
10050916 Snap pin 5.2 × 5.6 mm · IKEA BAGGEBO
10050917 Snap sleeve 3 × 6 mm, 10 mm flange · IKEA BAGGEBO
10060813 Door stop 30 × 23 × 1.5 mm · IKEA RUDSTA
100644 Connecting sleeve M4 × 25 mm · IKEA PAX
10071494 Handle 38.5 × 35 × 18 mm · IKEA VIHALS
10095544 Cabinet holder 42 × 14 mm · IKEA IVAR

13 more in the Part Finder

Questions about part 10005471

What size is part 10005471?

Part 10005471 is a snap sleeve: 5.2 × 5.6 mm (³⁄₁₆ × ¼″), head diameter 7.7 mm.

What tool fits part 10005471?

Part 10005471 goes in by hand: no tool is needed.

Which furniture models use part 10005471?

Part 10005471 is used in IKEA NISSAFORS.

10005471 Snap sleeve