Step 3 of 5
LACK TV bench step 3 of 5: Lower the shelf and seat the 4 L-brackets
Lower the 80×26 cm shelf between the four legs with its finished top face pointing down toward the tabletop and its 4 small pilot holes facing up toward you. Hold the shelf level with the leg holes and seat the 4 L-shaped shelf supports (131372) into the corners where each leg meets the underside of the shelf.
- 1× Lower shelf
- 4× Shelf support
131372
Tools: none, just your hands
- Make sure the side of the shelf with the 4 pilot holes faces up while the bench is upside down.
All 5 steps
00Overall
The outer size is IKEA's published size.
01Elevations
Drawn from our 3D model, to scale. Point at a part to find it in the list below; click it to jump there.
02Parts / cut list
| Part | Name | Qty | T | W | L | Material |
|---|---|---|---|---|---|---|
| A | Top panelThick honeycomb top board (90×26×5 cm). Built upside down on a rug so the finished top surface stays protected while the legs and lower shelf go on.50 × 260 × 900 mm | ×1 | 50 mm | 260 mm | 900 mm | Particleboard and fibreboard round a recycled paper honeycomb, acrylic paint, plastic edging |
| B | Back-left legHollow 5×5 cm leg that turns clockwise onto a corner double-ended screw. Its side pilot hole must end up facing inward across the 80 cm span so the lower shelf bracket can screw in.50 × 50 × 395 mm | ×1 | 50 mm | 50 mm | 395 mm | Particleboard and fibreboard, paper foil |
| C | Back-right legHollow 5×5 cm leg that turns clockwise onto a corner double-ended screw. Its side pilot hole must end up facing inward across the 80 cm span so the lower shelf bracket can screw in.50 × 50 × 395 mm | ×1 | 50 mm | 50 mm | 395 mm | Particleboard and fibreboard, paper foil |
| D | Front-left legHollow 5×5 cm leg that turns clockwise onto a corner double-ended screw. Its side pilot hole must end up facing inward across the 80 cm span so the lower shelf bracket can screw in.50 × 50 × 395 mm | ×1 | 50 mm | 50 mm | 395 mm | Particleboard and fibreboard, paper foil |
| E | Front-right legHollow 5×5 cm leg that turns clockwise onto a corner double-ended screw. Its side pilot hole must end up facing inward across the 80 cm span so the lower shelf bracket can screw in.50 × 50 × 395 mm | ×1 | 50 mm | 50 mm | 395 mm | Particleboard and fibreboard, paper foil |
| F | Lower shelf80×26 cm media shelf that fits between the four legs and rests on four L-shaped steel brackets.16 × 260 × 800 mm | ×1 | 16 mm | 260 mm | 800 mm | Particleboard, paper foil, plastic edging |
The parts' sizes are our 3D model's own estimates: close, not measured. Overall dimensions (90×26×45 cm) and hardware part numbers are from IKEA manual AA-472386-9; shelf height and bracket offsets are close estimates from the manual drawings. IKEA publishes only the outer size.
03Tools & materials
| Tools | ||
|---|---|---|
| Cross-head screwdriverDrives the 8 short screws (108443) that hold the four L-shaped shelf supports to the legs and lower shelf. | You need it | |
| Materials | ||
| Particleboard and fibreboard round a recycled paper honeycomb, acrylic paint, plastic edging | A | |
| Particleboard and fibreboard, paper foil | BCDE | |
| Particleboard, paper foil, plastic edging | F | |
Questions
How do the legs attach to the LACK TV bench?
Each leg attaches with a 7×70 mm double-ended screw (part 115980): screw one end into the corner of the upturned top panel by hand until the middle collar meets the board, then spin the leg clockwise onto the exposed threads.
Which way should the small holes on the LACK TV bench legs face?
When tightening the four legs onto the corner bolts, align the last quarter-turn so the small pilot hole on the side of each leg faces inward across the 80 cm span toward the opposite leg. The four L-shaped shelf brackets (131372 / 115753) screw into those holes.
How much weight can the LACK 90×26×45 cm TV bench hold?
IKEA rates the top panel for a maximum TV load of 30 kg and the suspended lower shelf for up to 10 kg.
What tools do I need to assemble the LACK TV bench?
Only a cross-head (Phillips/Pozidriv) screwdriver for the 8 short screws (part 108443 / 100365) that fasten the 4 lower shelf brackets. The 4 corner leg bolts go in by hand.
Safety
Do not sit or stand on the TV bench, and never exceed the 30 kg maximum load on the top panel or 10 kg on the lower shelf.
About this guide
The part numbers and counts match IKEA's assembly instructions, so you can check each piece against your box. The outer size, 90 × 26 × 45 cm, is IKEA's published size. Overall dimensions (90×26×45 cm) and hardware part numbers are from IKEA manual AA-472386-9; shelf height and bracket offsets are close estimates from the manual drawings. The 3D runs faster than real hands do.
IKEA gives a maximum TV load of 30 kg on the top panel and 10 kg on the lower shelf.
The manufacturer's instructions are on IKEA's product page (PDF). If something here differs from the manual in your box, follow the manual.
The 3D models, drawings and text are our own. IKEA and LACK are named only to say which product this guide is for.