Step 11 of 28

FJÄLLBO TV bench step 11 of 28: Screw four adjustable feet into the corner legs

Thread an adjustable foot (122158) by hand into the bottom of all four corner legs.

4× Adjustable foot 122158

Tools: none, just your hands

All 28 steps

00Overall

W1500 mm

D360 mm

H540 mm

The outer size is IKEA's published size.

01Elevations

Front

Right side

Drawn from our 3D model, to scale. Point at a part to find it in the list below; click it to jump there.

02Parts / cut list

Part	Name	Qty	T	W	L	Material
A	Right side panelThe right-hand steel frame with a diamond-mesh infill and two corner legs.16 × 360 × 491 mm	×1	16 mm	360 mm	491 mm	Steel, epoxy/polyester powder coating
B	Back bottom railThe lower back steel rail spanning between the two side panels under the bottom panel.16 × 32 × 1468 mm	×1	16 mm	32 mm	1468 mm	Steel, epoxy/polyester powder coating
C	Bottom panelThe full-width perforated steel bottom shelf that ties the front and back rails together.16 × 296 × 1468 mm	×1	16 mm	296 mm	1468 mm	Steel, epoxy/polyester powder coating
D	Front bottom railThe front bottom steel rail: it supports the front edge of the bottom panel and carries the two front middle posts.16 × 32 × 1468 mm	×1	16 mm	32 mm	1468 mm	Steel, epoxy/polyester powder coating
E	Left side panelThe left-hand steel frame with a diamond-mesh infill, closing the outer box of the bench.16 × 360 × 491 mm	×1	16 mm	360 mm	491 mm	Steel, epoxy/polyester powder coating
F	Corner gussetAn L-shaped steel gusset inside each front bottom corner that braces the front leg against the bottom panel.24 × 32 × 44 mm	×2	24 mm	32 mm	44 mm	Steel, epoxy/polyester powder coating
G	Front-right middle postDivides the front into the middle and right bays and carries the hinges for the middle mesh door.16 × 16 × 491 mm	×1	16 mm	16 mm	491 mm	Steel, epoxy/polyester powder coating
H	Front-left middle postDivides the front into the left and middle bays and carries the top strike plates for the left and middle doors.16 × 16 × 491 mm	×1	16 mm	16 mm	491 mm	Steel, epoxy/polyester powder coating
J	Back-left middle postSupports the back of the wooden shelf and top frame between the left and middle bays.16 × 16 × 491 mm	×1	16 mm	16 mm	491 mm	Steel, epoxy/polyester powder coating
K	Back-right middle postSupports the back of the wooden shelf and top frame between the right and middle bays.16 × 16 × 491 mm	×1	16 mm	16 mm	491 mm	Steel, epoxy/polyester powder coating
L	Middle shelfA solid pine shelf notched around the four middle posts so it spans all three bays inside the steel frame.16 × 322 × 1464 mm	×1	16 mm	322 mm	1464 mm	Solid pine, stain, clear acrylic lacquer
M	Top panelThe stained and lacquered solid pine top board, rated for a TV and equipment up to 30 kg.18 × 360 × 1500 mm	×1	18 mm	360 mm	1500 mm	Solid pine, stain, clear acrylic lacquer
N	Top frameA welded steel rectangle screwed to the underside of the pine top panel before the top is lifted onto the frame.16 × 360 × 1500 mm	×1	16 mm	360 mm	1500 mm	Steel, epoxy/polyester powder coating
P	Mesh doorA steel-framed mesh door that lets remote-control signals pass through while keeping equipment ventilated.16 × 412 × 462 mm	×3	16 mm	412 mm	462 mm	Steel, epoxy/polyester powder coating

The parts' sizes are our 3D model's own estimates: close, not measured. The outer size is IKEA’s. Tube and board thicknesses, the shelf notches and the tab positions are our own estimates, so they are close, not measured. IKEA publishes only the outer size.

03Tools & materials

Tools
	Cross-head screwdriverDrives every machine screw and wood screw in the frame, shelf, top panel, hinges, magnetic catches and wall brackets.	You need it
	Flat screwdriverHolds the barrel sleeve nuts (152526) from outside the front legs while the shoulder screws (152527) are threaded in from inside.	You need it
	Spirit levelChecks that the bench sits level across its width and depth while you adjust the eight feet.	You need it
Materials
	Steel, epoxy/polyester powder coating	ABCDEFGHJKNP
	Solid pine, stain, clear acrylic lacquer	LM

Not in the box: 2 wall screws and 2 wall plugs that suit your wall.

04Hardware

×8	Adjustable foot	`122158`	20 × 7 mm disc, M6 × 12 mm stem	Black polypropylene and zinc-plated steel
×16	Wood screw	`152497`	Ø 4.5 × 12 mm	Black steel
×42	Machine screw	`107616`	M5 × 12 mm	Black steel
×4	Shoulder screw	`152527`	M5 × 12 mm, 7 mm shoulder neck	Black steel
×4	Sleeve nut	`152526`	Ø 7/10 × 13 mm, M5 thread	Black steel
×8	Long machine screw	`139212`	M5 × 30 mm	Black steel
×10	Cable clip	`123742`	18 × 18 × 12.5 mm	Black polyethylene (PE-LD)
×6	Butt hinge	`153334`	35 × 45 × 1.5 mm	Black steel
×3	Magnetic catch	`139578`	Ø 16 × 3.8 mm, 4 mm hole	Nickel-plated steel
×3	Magnet screw	`114755`	M4 × 12 mm	Black steel

Questions

What tools do I need to assemble the FJÄLLBO TV bench?

You need a cross-head (Pozidriv PZ2) screwdriver for all machine and wood screws, a second screwdriver to hold the four barrel sleeve nuts (152526) from outside the front legs in step 10, a spirit level to level the eight adjustable feet, and wall screws and plugs suited to your wall.

Why are the four front corner screws left slightly loose in step 10?

Leaving the four shoulder screws (152527) and sleeve nuts (152526) slightly loose while you fit the middle posts, wooden shelf and top panel lets the steel frame settle square on its adjustable feet before you tighten them fully in step 26.

Do remote controls work through the FJÄLLBO mesh doors?

Yes. The three doors and both side panels use an open diamond steel mesh that lets remote-control signals pass through while keeping consoles and receivers ventilated.

How much weight can the FJÄLLBO TV bench hold?

IKEA gives a maximum load of 30 kg on the solid pine top panel and 53 kg on the middle shelf.

Safety

Furniture that tips over can cause serious or fatal crushing injuries. IKEA says this TV bench must be fixed to the wall using the two brackets at the back of the top frame. Use screws and plugs that suit your wall, and ask a professional if you are not sure.

About this guide

This is an independent 3D engineering guide modeled from physical hardware specifications and standard fastener part numbers so you can identify your pieces before building. The outer size, 150 × 36 × 54 cm, is IKEA's published size. The outer size is IKEA’s. Tube and board thicknesses, the shelf notches and the tab positions are our own estimates, so they are close, not measured. The 3D runs faster than real hands do.

IKEA gives a maximum load of 30 kg on the top panel and 53 kg on the shelf.

The manufacturer's instructions are on IKEA's product page (PDF). If something here differs from the manual in your box, follow the manual.

The 3D models, drawings and text are our own. IKEA and FJÄLLBO are named only to say which product this guide is for.