Part number
107616 Machine screw
The main M5 × 12 mm black machine screw used for the rails, bottom panel, corner gussets, top frame lugs, wall brackets and butt hinges.
Quick size & thread spec
- Length
- 12 mm · ½″
- Diameter
- 5 mm · ³⁄₁₆″
- Thread
- Metric, M5
- Drive
- PZ2
- Material
- Black steel
1:1 On-Screen Screw & Part Sizer
1:1 SCALEHold your physical screw or dowel flat against the screen to verify length and thread diameter.
Length: 12 mm Ø Diameter: 5 mm
- In the box
- 42 with the IKEA FJÄLLBO TV bench
Lost or broke part 107616?
Ask IKEA for spare part 107616, naming the product it is for. IKEA’s UK site says small spare parts such as screws, knobs or plugs can be ordered free online; elsewhere, look under Customer service, then Spare parts, on your country’s IKEA site, or ask at a store’s customer service desk.
Where it goes
- IKEA FJÄLLBO TV bench 42 in the box, in 9 steps
- Step 2: Screw the back rail to the right side panel
- Step 4: Screw the bottom panel to the right side panel
- Step 6: Screw the front rail to the right side panel
- Step 8: Screw the left side panel to the rails and bottom panel
- Step 9: Screw the two corner gussets to the bottom panel
- Step 21: Screw the top frame lugs to the posts
- Step 22: Move the bench to the wall and set the wall brackets
- Step 24: Screw the six butt hinges onto the three mesh doors
- Step 25: Hang the three mesh doors on the front of the frame
Commonly used in
IKEA furniture series that use this part:
- FJÄLLBO
Fitting it
Start the screw by hand so it goes in straight, then drive it with the tool the manual shows: a cross-head screwdriver for a cross, a flat one for a slot, the hex key for a hex socket. Stop as soon as its head sits snug, as one more turn can strip a hole in particleboard. A drill-driver is too strong for most flat-pack screws.
Taking it out
Turn it anticlockwise with the same tool. A head whose cross has worn round can still be gripped with a rubber band pressed between it and the screwdriver. A hole that no longer grips can take a glued wooden dowel, left to dry and drilled again.
Other screws on iFlatpack
100086Long screw IKEA MICKE100181Socket screw M6 × 16 mm · IKEA IDÅSEN100214Long screw IKEA HEMNES, IKEA IVAR, IKEA RAST, IKEA TROFAST100215Long screw IKEA BEKVÄM100229Screw IKEA TROFAST100344Euro screw 13 mm long, 6 mm across, 10 mm head · IKEA IVAR100347Screw IKEA HEMNES, IKEA BISSA, IKEA HEMNES100349Screw IKEA HEMNES, IKEA TROFAST100365Screw IKEA MALM, IKEA MICKE100372Short screw 17 × 5 mm · IKEA KALLAX, IKEA KALLAX, IKEA LACK100402Connecting screw M4 × 18 mm · IKEA PAX100404Machine screw M4, 10 mm long · IKEA IVAR
Questions about part 107616
What size is screw 107616?
Part 107616 is a machine screw: 5 × 12 mm (³⁄₁₆ × ½″), metric, M5, PZ2 drive.
What tool fits part 107616?
Part 107616 has a PZ2 drive: use a PZ2 (Pozidriv) screwdriver or bit. Our guides drive it with a cross-head screwdriver.
Which furniture models use part 107616?
Part 107616 is used in IKEA FJÄLLBO.