iFlatpack.com is an independent platform creating original 3D procedural instructions. We are not affiliated with, endorsed by, or sponsored by Inter IKEA Systems B.V. or any other brand mentioned. All product names and part numbers are used strictly for identification and compatibility purposes.

Step 7 of 7

Gaming chair step 7 of 7: Fit the side covers and the pillows

Press a side cover on over each recline bracket and fix it with its small screw. Then strap the lumbar pillow round the backrest at the small of your back, and the neck pillow through the slots in its head.

1× Lumbar pillow
1× Neck pillow
2× Side cover
2× Cover screw

Tools: Cross-head screwdriver

All 7 steps

Parts and hardware checklist

1×	Five-star base	about 70×70×13.1 cm
1×	Seat	about 52×52×14 cm
2×	Armrest	about 28×26×10 cm
1×	Backrest	about 88×57×8 cm
1×	Lumbar pillow	about 34×22×9 cm
1×	Neck pillow	about 26×14×8 cm
5×	Caster	no number in the manual · 60 mm wheels
1×	Gas lift	no number in the manual
1×	Dust sleeve	no number in the manual
1×	Tilt mechanism	no number in the manual
16×	M8 screw	no number in the manual · M8 × 20 mm
2×	Side cover	no number in the manual
2×	Cover screw	no number in the manual

Tools you need

Cross-head screwdriver · For the side covers’ two small screws (some chairs’ hex keys have a cross-head tip on their long end).

Questions

Which way does the tilt mechanism go?

With its arrow marked FRONT pointing to the seat’s front. Fitted backwards, the seat tilts about its back edge and tips forward, and the levers end up on the wrong sides.

What tools do I need for a gaming chair?

The hex key that comes with it for the M8 screws, and a cross-head screwdriver for the side covers’ small screws.

The chair will not go up or down. Why?

Check that the gas lift’s protective cap came off its button before the seat went on, and that the lift’s rod is pushed fully into the mechanism’s cup.

Should I tighten the screws again?

Yes: check them after the first few weeks of use, and now and then after that.

Safety

Check that every screw is tight before you sit on the chair, and tighten them again after a few weeks. Keep your hands clear of the recline brackets when you work the recline lever: they snap forward.

About this guide

This is our own generic racing-style chair, not one brand’s. Its parts and steps follow the way racing chairs’ manuals put them together: the noblechairs HERO’s assembly instructions and Corsair’s T3 RUSH quick start guide, which marks the tilt mechanism with an arrow saying FRONT. Your chair’s own manual has the final word on its parts, its screws and its order.

Unlike the HERO, which comes with one armrest fitted, ours bolts both armrests on, four M8 screws each; and its backrest goes on with the seat already on the gas lift, as the HERO does it. The sizes are typical ones, so the cards give few.

Sources: Corsair T3 RUSH (downloads).

The 3D models, drawings and text are our own.