`117784` Countersunk screw

Zinc-plated countersunk M6 × 12 mm screw with a 4 mm hex socket, driven through the front and back posts into the removable top side rails in steps 10 and 12.

Quick size & thread spec

Length: 12 mm · ½″
Diameter: 6 mm · ¼″
Thread: Metric, M6
Drive: hex key, 4 mm
Material: Zinc-plated steel

1:1 On-Screen Screw & Part Sizer

1:1 SCALE

Hold your physical screw or dowel flat against the screen to verify length and thread diameter.

012 mm

Ø 6 mm

Length: 12 mm Ø Diameter: 6 mm

Calibrate phone screen width: 65 mm

Standard phone: 65 mm · Max / Ultra: 72 mm

Get a replacement kit ↗Search Amazon for compatible replacement hardware kits Find exact part #117784 on eBay ↗

In the box: 4 with the IKEA RUDSTA 80×37×120

Lost or broke part 117784?

Ask IKEA for spare part 117784, naming the product it is for. IKEA’s UK site says small spare parts such as screws, knobs or plugs can be ordered free online; elsewhere, look under Customer service, then Spare parts, on your country’s IKEA site, or ask at a store’s customer service desk.

IKEA UK spare parts ↗ IKEA US spare parts ↗

Where it goes

IKEA RUDSTA 80×37×120 4 in the box, in 2 steps
1. Step 10: Fit the right top rail over the glass side panel and screw it to the posts
2. Step 12: Fit the left top rail over the glass side panel and screw it to the posts

Commonly used in

IKEA furniture series that use this part:

RUDSTA

Fitting it

Start the screw by hand so it goes in straight, then drive it with the tool the manual shows: a cross-head screwdriver for a cross, a flat one for a slot, the hex key for a hex socket. Stop as soon as its head sits snug, as one more turn can strip a hole in particleboard. A drill-driver is too strong for most flat-pack screws.

Taking it out

Turn it anticlockwise with the same tool. A head whose cross has worn round can still be gripped with a rubber band pressed between it and the screwdriver. A hole that no longer grips can take a glued wooden dowel, left to dry and drilled again.

Other screws on iFlatpack

100086 Long screw IKEA MICKE
100181 Socket screw M6 × 16 mm · IKEA IDÅSEN
100214 Long screw IKEA HEMNES, IKEA IVAR, IKEA RAST, IKEA TROFAST
100215 Long screw IKEA BEKVÄM
100229 Screw IKEA TROFAST
100344 Euro screw 13 mm long, 6 mm across, 10 mm head · IKEA IVAR
100347 Screw IKEA HEMNES, IKEA BISSA, IKEA HEMNES
100349 Screw IKEA HEMNES, IKEA TROFAST
100365 Screw IKEA MALM, IKEA MICKE
100372 Short screw 17 × 5 mm · IKEA KALLAX, IKEA KALLAX, IKEA LACK
100402 Connecting screw M4 × 18 mm · IKEA PAX
100404 Machine screw M4, 10 mm long · IKEA IVAR

55 more in the Part Finder

Questions about part 117784

What size is screw 117784?

Part 117784 is a countersunk screw: 6 × 12 mm (¼ × ½″), metric, M6, hex key, 4 mm drive.

What tool fits part 117784?

Part 117784 has a hex 4 mm drive: use a 4 mm hex key. Our guides drive it with the hex key 130445.

Which furniture models use part 117784?

Part 117784 is used in IKEA RUDSTA.

117784 Countersunk screw