Part number
10073004 Button-head screw
Black class 10.9 button-head machine screw with a 4 mm hex socket, used across the main frame corners (8), door stops (2), steel back panels (10) and top panel (2).
Quick size & thread spec
- Length
- 14 mm · ⁹⁄₁₆″
- Diameter
- 6 mm · ¼″
- Thread
- Metric, M6
- Drive
- hex key, 4 mm
- Material
- Black steel
1:1 On-Screen Screw & Part Sizer
1:1 SCALEHold your physical screw or dowel flat against the screen to verify length and thread diameter.
Length: 14 mm Ø Diameter: 6 mm
- In the box
- 22 with the IKEA RUDSTA 80×37×120
Lost or broke part 10073004?
Ask IKEA for spare part 10073004, naming the product it is for. IKEA’s UK site says small spare parts such as screws, knobs or plugs can be ordered free online; elsewhere, look under Customer service, then Spare parts, on your country’s IKEA site, or ask at a store’s customer service desk.
Where it goes
- IKEA RUDSTA 80×37×120 22 in the box, in 7 steps
- Step 1: Bolt the two bottom rails to the right side frame
- Step 2: Bolt the two top rails to the right side frame
- Step 3: Lower the left side frame onto the four rails and bolt all four corners
- Step 6: Fasten the two door stops behind the bottom front rail
- Step 13: Screw the lower and middle steel back panels to the back posts
- Step 14: Fasten the lower corners of the upper back panel and turn the cabinet around
- Step 18: Bolt the rear flange of the top panel to the upper back corners
Commonly used in
IKEA furniture series that use this part:
- RUDSTA
Fitting it
Start the screw by hand so it goes in straight, then drive it with the tool the manual shows: a cross-head screwdriver for a cross, a flat one for a slot, the hex key for a hex socket. Stop as soon as its head sits snug, as one more turn can strip a hole in particleboard. A drill-driver is too strong for most flat-pack screws.
Taking it out
Turn it anticlockwise with the same tool. A head whose cross has worn round can still be gripped with a rubber band pressed between it and the screwdriver. A hole that no longer grips can take a glued wooden dowel, left to dry and drilled again.
Other screws on iFlatpack
100086Long screw IKEA MICKE100181Socket screw M6 × 16 mm · IKEA IDÅSEN100214Long screw IKEA HEMNES, IKEA IVAR, IKEA RAST, IKEA TROFAST100215Long screw IKEA BEKVÄM100229Screw IKEA TROFAST100344Euro screw 13 mm long, 6 mm across, 10 mm head · IKEA IVAR100347Screw IKEA HEMNES, IKEA BISSA, IKEA HEMNES100349Screw IKEA HEMNES, IKEA TROFAST100365Screw IKEA MALM, IKEA MICKE100372Short screw 17 × 5 mm · IKEA KALLAX, IKEA KALLAX, IKEA LACK100402Connecting screw M4 × 18 mm · IKEA PAX100404Machine screw M4, 10 mm long · IKEA IVAR
Questions about part 10073004
What size is screw 10073004?
Part 10073004 is a button-head screw: 6 × 14 mm (¼ × ⁹⁄₁₆″), metric, M6, hex key, 4 mm drive.
What tool fits part 10073004?
Part 10073004 has a hex 4 mm drive: use a 4 mm hex key. Our guides drive it with the hex key 130445.
Which furniture models use part 10073004?
Part 10073004 is used in IKEA RUDSTA.