Drag to turn it · scroll to zoom

Part number

10049370 Wood dowel

Goes through an upright into a rung’s tenon and locks the joint. Tap it in with the hammer over the wooden block, not with the hammer on the dowel.

Quick size & thread spec

Length
40 mm · 1⅝″
Diameter
8 mm · ⁵⁄₁₆″
Tool
by hand
Material
Birch or beech

1:1 On-Screen Screw & Part Sizer

1:1 SCALE

Hold your physical screw or dowel flat against the screen to verify length and thread diameter.

040 mm
Ø 8 mm

Length: 40 mm Ø Diameter: 8 mm

Standard phone: 65 mm · Max / Ultra: 72 mm
Get a replacement kit ↗Search Amazon for compatible replacement hardware kits Find exact part #10049370 on eBay ↗
In the box
16 with the IKEA IVAR shelving unit

Lost or broke part 10049370?

Ask IKEA for spare part 10049370, naming the product it is for. IKEA’s UK site says small spare parts such as screws, knobs or plugs can be ordered free online; elsewhere, look under Customer service, then Spare parts, on your country’s IKEA site, or ask at a store’s customer service desk.

IKEA UK spare parts ↗ IKEA US spare parts ↗

Where it goes

Commonly used in

IKEA furniture series that use this part:

  • IVAR

Fitting it

A dowel or pin joins two boards and keeps them in line. Push it into its hole by hand or tap it in with a hammer, as the manual shows, until the length it shows stands out (often about half): the part that stands out goes into the next board. Driven all the way in, it no longer joins anything.

Taking it out

Grip the part that stands out with pliers and pull it straight out, turning it a little. One that broke off in its hole can be drilled out slowly with a wood drill bit of its own width, no deeper than the hole, and a new one fitted.

Other dowels and pins on iFlatpack

Questions about part 10049370

What size is part 10049370?

Part 10049370 is a wood dowel: 8 × 40 mm (⁵⁄₁₆ × 1⅝″).

What tool fits part 10049370?

Part 10049370 goes in by hand: no tool is needed.

Which furniture models use part 10049370?

Part 10049370 is used in IKEA IVAR.