Step 8 of 9 · IKEA manual page 8
KNAGGLIG box 46×31×25 step 8 of 9: Screw on the other handle board
Lay the second board with a hand-hold across the top at the open edge, flush with the sides, and screw it on with 4 screws (108560).
- 1× Handle board
- 4× Screw
108560
Tools: Small cross-head screwdriver
All 9 steps
- 1Stand the bottom against a long side
- 2Screw the bottom to the first side
- 3Turn it over and add the other long side
- 4Screw the bottom to the second side
- 5Screw two end boards to one end common mistake
- 6Screw on the end’s handle board
- 7Screw two end boards to the other end
- 8Screw on the other handle board
- 9Stand the box on its feet
Parts and hardware checklist
| 2× | Long side | about 43.6×24.4×3.4 cm |
| 1× | Bottom | about 43.6×28.6×3 cm |
| 4× | End board | about 31×7×1.2 cm |
| 2× | Handle board | about 31×7×1.2 cm |
| 4× | Long screw | #108363 |
| 24× | Screw | #108560 |
Tools you need
- Cross-head screwdriver · Not in the box: the manual asks for two. This, the larger, drives the 4 long screws (108363).
- Small cross-head screwdriver · Not in the box: the smaller of the two the manual asks for, for the 24 screws (108560) that hold the end boards.
Questions
What tools do I need for the KNAGGLIG box?
Two cross-head screwdrivers, as the manual shows: a larger one for the 4 long screws (108363) and a smaller one for the 24 screws (108560).
Can I use a drill?
The manual crosses out a drill for both kinds of screw: turn them in by hand. In soft pine a drill easily drives a screw too far.
An end board does not line up. What do I do?
Take its screws out, push the board until both its ends are flush with the outside of the long sides, and screw it on again.
Can I hang the box on a wall or stand on it?
No. IKEA says it is not made to hang on a wall, and the manual warns against standing on it.
Can I treat the wood?
Yes: it comes untreated, and IKEA says it can be treated with oil or a glazing paint.
Safety
From the manual: do not stand on the box. IKEA says it is not to be hung on a wall.
About this guide
The steps, the part numbers, the counts and the order come from IKEA's assembly manual AA-1159337-8 (2025-10-03). The outer size, 46 × 31 × 25 cm, is IKEA's published size. The box’s size is IKEA’s; the boards’ thickness, the posts, the battens, the slats and the hand-hold are read off the manual’s drawings and IKEA’s photos, so they are close, not measured. The 3D runs faster than real hands do.
The manufacturer's instructions are on IKEA's product page (PDF). If something here differs from the manual in your box, follow the manual.
The 3D models, drawings and text are our own. IKEA and KNAGGLIG are named only to say which product this guide is for.