Step 13 of 14
KLEPPSTAD wardrobe step 13 of 14: Press the 109338 cup hinges into the three doors
Lay all three doors face down on the floor. Press 2 cup hinges (109338) into the 35 mm recesses of each door (6 hinges in all) and secure their wings with 12 screws (100365).
Tools: Cross-head screwdriver
All 14 steps
- 1 Push in the 101350 dowels and divider cam bolts
- 2 Fit cam bolts and 109221 hinge plates on the sides and divider
- 3 Fit and lock the vertical interior divider common mistake
- 4 Fit the top panel onto the vertical divider
- 5 Fit and lock the left side panel
- 6 Fit the front plinth and back support rail
- 7 Fit and lock the right side panel
- 8 Roll onto the front and place the back panels
- 9 Square the frame and nail on the back panels
- 10 Stand the wardrobe up and anchor it to the wall
- 11 Insert the 131372 shelf supports and four shelves
- 12 Mount the clothes rail under the left top shelf
- 13 Press the 109338 cup hinges into the three doors
- 14 Clip on the three doors and fit the handles
00Overall
The outer size is IKEA's published size.
01Elevations
Drawn from our 3D model, to scale. Point at a part to find it in the list below; click it to jump there.
02Parts / cut list
| Part | Name | Qty | T | W | L | Material |
|---|---|---|---|---|---|---|
| A | Bottom panelForms the floor of both compartments above the front and back base plinths.18 × 531 × 1134 mm | ×1 | 18 mm | 531 mm | 1134 mm | Particleboard, paper foil, plastic edging |
| B | Vertical dividerDivides the 117 cm wardrobe into the wide 2-door hanging bay on the left and the 1-door shelving bay on the right.18 × 531 × 1654 mm | ×1 | 18 mm | 531 mm | 1654 mm | Particleboard, paper foil, plastic edging |
| C | Top panelCloses the top of the wardrobe frame and carries the two 106989 anti-tip wall brackets.18 × 531 × 1134 mm | ×1 | 18 mm | 531 mm | 1134 mm | Particleboard, paper foil, plastic edging |
| D | Left sideLeft outer wall of the wardrobe; carries the left door on two 109338 cup hinges and the left end of the clothes rail.18 × 531 × 1760 mm | ×1 | 18 mm | 531 mm | 1760 mm | Particleboard, paper foil, plastic edging |
| E | Front plinthFinished kickboard across the front under the bottom panel.18 × 70 × 1134 mm | ×1 | 18 mm | 70 mm | 1134 mm | Particleboard, paper foil |
| F | Back support railRaw particleboard rail across the back under the bottom panel that braces the foot of the wardrobe.18 × 70 × 1134 mm | ×1 | 18 mm | 70 mm | 1134 mm | Particleboard, paper foil |
| G | Right sideRight outer wall of the wardrobe; carries the right door and the right ends of the three compartment shelves.18 × 531 × 1760 mm | ×1 | 18 mm | 531 mm | 1760 mm | Particleboard, paper foil, plastic edging |
| H | Left back panelThin painted fibreboard panel closing the back of the 2-door hanging compartment.3 × 777 × 1686 mm | ×1 | 3 mm | 777 mm | 1686 mm | Fibreboard, acrylic paint |
| J | Right back panelThin painted fibreboard panel closing the back of the 1-door shelving compartment.3 × 387 × 1686 mm | ×1 | 3 mm | 387 mm | 1686 mm | Fibreboard, acrylic paint |
| K | Top shelfFull-width top shelf above the clothes rail in the left 2-door compartment.18 × 511 × 751 mm | ×1 | 18 mm | 511 mm | 751 mm | Particleboard, paper foil, plastic edging |
| L | Compartment shelfAdjustable shelf inside the right-hand 1-door compartment.18 × 361 × 511 mm | ×3 | 18 mm | 361 mm | 511 mm | Particleboard, paper foil, plastic edging |
| M | Clothes railWhite powder-coated steel hanging rail in the left 2-door compartment, holding around 20 shirts on hangers.24 × 50 × 753 mm | ×1 | 24 mm | 50 mm | 753 mm | Steel, pigmented epoxy/polyester powder coating |
| N | Left doorFull-height hinged wardrobe door hung on two 3-way adjustable cup hinges (109338).16 × 386 × 1686 mm | ×1 | 16 mm | 386 mm | 1686 mm | Particleboard, paper foil, plastic edging |
| P | Middle doorFull-height hinged wardrobe door hung on two 3-way adjustable cup hinges (109338).16 × 386 × 1686 mm | ×1 | 16 mm | 386 mm | 1686 mm | Particleboard, paper foil, plastic edging |
| Q | Right doorFull-height hinged wardrobe door hung on two 3-way adjustable cup hinges (109338).16 × 386 × 1686 mm | ×1 | 16 mm | 386 mm | 1686 mm | Particleboard, paper foil, plastic edging |
| R | Door handleWhite bow handle fitted near the opening edge of each of the three doors.16 × 26 × 116 mm | ×3 | 16 mm | 26 mm | 116 mm | ABS plastic |
The parts' sizes are our 3D model's own estimates: close, not measured. Board thicknesses, compartment widths and hole coordinates are our own estimates from IKEA’s assembly drawings. IKEA publishes only the outer size.
03Tools & materials
| Tools | ||
|---|---|---|
| HammerDrives the 30 nails (101201) around the left and right back panels. | You need it | |
| Cross-head screwdriverDrives the 12 cam bolts (118331), 12 hinge-plate screws (113287), 2 wall-bracket screws (109041), 2 clothes-rail screws (108443) and 12 hinge cup screws (100365). | You need it | |
| Flat screwdriverTurns the 12 cam locks (119081) in the divider, bottom and top panels, and drives the wall anchoring screws. | You need it | |
| Materials | ||
| Particleboard, paper foil, plastic edging | ABCDGKLNPQ | |
| Particleboard, paper foil | EF | |
| Fibreboard, acrylic paint | HJ | |
| Steel, pigmented epoxy/polyester powder coating | M | |
| ABS plastic | R | |
Not in the box: 2 wall screws and 2 wall plugs suited to your wall.
04Hardware
| ×20 | Dowel | 101350 | 8 × 30 mm | Birch, beech or rubberwood |
| ×12 | Cam bolt | 118331 | 41 mm long | Zinc-plated steel, grey polypropylene sleeve |
| ×12 | Cam lock | 119081 | 15 mm across | Grey composite |
| ×6 | Hinge mounting plate | 109221 | Zinc-plated steel | |
| ×12 | Plate screw | 113287 | 6.3 × 11.5 mm | Zinc-plated steel |
| ×30 | Nail | 101201 | 20 × 1.9 mm, 5.7 mm head | Zinc-plated steel |
| ×2 | Wall bracket | 106989 | Galvanized steel | |
| ×2 | Screw | 109041 | Zinc-plated steel | |
| ×4 | Washer | 100823 | 5 mm hole, 16 mm across, 1 mm thick | Zinc-plated steel |
| ×16 | Shelf support | 131372 | 3.5 mm pin, 9.2 mm head | Zinc-plated zamak |
| ×2 | Screw | 108443 | 4.5 × 25 mm | Zinc-plated steel |
| ×6 | Cup hinge | 109338 | Nickel-plated steel | |
| ×12 | Hinge screw | 100365 | 3.5 × 14 mm | Zinc-plated steel |
Questions
Which way does the vertical interior divider go in the KLEPPSTAD 3-door wardrobe?
The vertical divider sits off-centre between the wide 2-door hanging bay on the left and the narrow 1-door shelving bay on the right. Its pre-drilled pilot holes for the two 109221 hinge mounting plates must face the wide left compartment near the front edge so the middle door can hang on it.
What hardware holds the KLEPPSTAD 3-door wardrobe together?
Twenty wooden dowels (101350), twelve cam bolts (118331), twelve cam locks (119081), thirty back-panel nails (101201), sixteen shelf supports (131372), two clothes-rail screws (108443), six cup hinges (109338) with twelve door screws (100365), six hinge mounting plates (109221) with twelve Euro screws (113287), and two wall brackets (106989) with washers (100823) and screws (109041).
How many shelves come with the IKEA KLEPPSTAD 3-door wardrobe 117×176 cm?
Four shelves are included in the box: one wide top shelf above the clothes rail in the left 2-door bay and three shelves in the right 1-door bay, all resting on sixteen metal shelf supports (131372).
Do I have to anchor the KLEPPSTAD wardrobe to the wall?
Yes. Opening all three hinged doors shifts the centre of gravity forward, so both 106989 top brackets must be anchored into wall studs or masonry plugs before loading the wardrobe.
Safety
Furniture that tips over can cause serious or fatal crushing injuries. Always anchor this KLEPPSTAD wardrobe to the wall using the two 106989 brackets in the box and wall plugs suited to your wall.
About this guide
The part numbers and counts match IKEA's assembly instructions, so you can check each piece against your box. The outer size, 117 × 55 × 176 cm, is IKEA's published size. Board thicknesses, compartment widths and hole coordinates are our own estimates from IKEA’s assembly drawings. The 3D runs faster than real hands do.
Includes 1 clothes rail and 4 interior shelves (1 wide top shelf on the left, 3 shelves on the right); extra KLEPPSTAD shelves can be added.
The manufacturer's instructions are on IKEA's product page (PDF). If something here differs from the manual in your box, follow the manual.
The 3D models, drawings and text are our own. IKEA and KLEPPSTAD are named only to say which product this guide is for.