Step 9 of 9
ENHET mirror cab step 9 of 9: Clip on the mirror door and adjust the hinges
Lift the mirror door to the cabinet and clip both 109338 hinge arms onto the 109221 mounting plates on the left side until they click shut. Use the three adjustment screws on each hinge to fine-tune the door depth, vertical height and side-to-side gap.
- 1× Mirror door
Tools: none, just your hands
All 9 steps
- 1 Click the bottom panel onto the left side
- 2 Click the right side panel onto the bottom
- 3 Unfold and slide in the back panel
- 4 Click the top panel onto both sides common mistake
- 5 Lock the back panel with clips and wedges
- 6 Fit the wall brackets and anchor to the wall
- 7 Push in the shelf pins and place both shelves
- 8 Mount the hinge plates and press in the hinges
- 9 Clip on the mirror door and adjust the hinges
00Overall
The outer size is IKEA's published size.
01Elevations
Drawn from our 3D model, to scale. Point at a part to find it in the list below; click it to jump there.
02Parts / cut list
| Part | Name | Qty | T | W | L | Material |
|---|---|---|---|---|---|---|
| A | Left side panelLeft-hand side panel standing on its front edge while the cabinet frame is clicked together. Its keyhole slots at both ends lock onto the ribbed wedge dowels of the bottom and top panels.18 × 170 × 750 mm | ×1 | 18 mm | 170 mm | 750 mm | Particleboard, plastic foil, plastic edging |
| B | Bottom panelForms the floor of the ENHET wall cabinet. Its ribbed wedge dowels push into the side panels’ keyhole slots and click home when pressed towards the front.18 × 170 × 564 mm | ×1 | 18 mm | 170 mm | 564 mm | Particleboard, plastic foil, plastic edging |
| C | Right side panelRight-hand side panel whose bottom keyhole slots engage the wedge dowels on the right end of the bottom panel and slide forward until they click.18 × 170 × 750 mm | ×1 | 18 mm | 170 mm | 750 mm | Particleboard, plastic foil, plastic edging |
| D | Fold-out back panelFold-out thin fibreboard back panel, white on the inside face. It unfolds flat and slides down the grooves of both sides into the bottom groove before the top panel clicks shut.3 × 576 × 726 mm | ×1 | 3 mm | 576 mm | 726 mm | Fibreboard, plastic foil |
| E | Top panelCloses the open top of the U-frame over the back panel’s top edge, clicking into the top keyhole slots of both side panels at once.18 × 170 × 564 mm | ×1 | 18 mm | 170 mm | 564 mm | Particleboard, plastic foil, plastic edging |
| F | Lower shelfAdjustable interior shelf resting on 4 metal shelf support pins (131372) at any height along the side hole columns.16 × 138 × 562 mm | ×1 | 16 mm | 138 mm | 562 mm | Particleboard, plastic foil, plastic edging |
| G | Upper shelfAdjustable interior shelf resting on 4 metal shelf support pins (131372) at any height along the side hole columns.16 × 138 × 562 mm | ×1 | 16 mm | 138 mm | 562 mm | Particleboard, plastic foil, plastic edging |
| H | Mirror doorFull-height ENHET mirror door hung on two 3-way adjustable soft-close cup hinges (109338) clipped onto mounting plates (109221) inside the left side panel.16 × 596 × 746 mm | ×1 | 16 mm | 596 mm | 746 mm | Particleboard, plastic foil, plastic edging, mirror glass |
The parts' sizes are our 3D model's own estimates: close, not measured. Panel thicknesses, rear groove setback and hole positions are our own estimates from IKEA’s assembly drawings. IKEA publishes only the outer size.
03Tools & materials
| Tools | ||
|---|---|---|
| Spirit levelLaid across the top panel to check that the ENHET cabinet is level before driving the wall screws. | You need it | |
| Cross-head screwdriverDrives the four 109049 screws that fix the 106989 wall brackets to the top panel and turns the 3-way hinge adjustment screws. | You need it | |
| Flat screwdriverDrives the wall anchoring screws through the upright legs of the top wall brackets. | You need it | |
| Materials | ||
| Particleboard, plastic foil, plastic edging | ABCEFG | |
| Fibreboard, plastic foil | D | |
| Particleboard, plastic foil, plastic edging, mirror glass | H | |
Not in the box: 2 wall screws and 2 wall plugs suited to your wall.
04Hardware
| ×8 | Back panel clip | 10093081 | 16 × 10 mm | White acetal plastic |
| ×8 | Clip wedge | 10093082 | 10 × 6 mm | White acetal plastic |
| ×2 | Wall bracket | 106989 | 62 × 42 × 20 mm, 2.5 mm steel | Galvanized sheet steel |
| ×4 | Screw | 109049 | 4 × 16 mm pan-head | Zinc-plated steel |
| ×2 | Washer | 100823 | 5 mm hole, 16 mm across, 1 mm thick | Zinc-plated steel |
| ×8 | Shelf support | 131372 | 3.5 mm pin, 9.2 mm head | Zinc-plated zamak |
| ×2 | Hinge mounting plate | 109221 | 60 × 24 mm | Zinc-plated steel |
| ×2 | Soft-close hinge | 109338 | Ø35 mm cup, 110° opening | Nickel-plated steel |
Questions
Do I need tools to assemble the ENHET wall cabinet frame?
No tools are needed for the four main frame panels or the fold-out back panel: the panels click together on pre-mounted ribbed wedge dowels and the back panel locks in place with 8 push-in plastic clips (10093081) and wedges (10093082). You only need screwdrivers for the wall-anchoring brackets and hinge adjustments.
Can the ENHET mirror door open to either the left or the right?
Yes. Both side panels have pre-bored twin holes near the front edge for the 109221 hinge mounting plates, and the mirror door is symmetrical, so you can hang it on either the left or the right side.
At what height should I mount the ENHET mirror cabinet on the wall?
Mount the cabinet at eye level—typically with the top suspension bracket screw holes around 145 cm above the floor—and always have two people lift and hold the cabinet while anchoring both 106989 brackets with wall plugs and screws suited to your wall.
How do I adjust the ENHET mirror door if it hangs crooked?
Each 109338 soft-close hinge has three adjustment points: loosen the rear screw to slide the door in or out for depth, loosen the mounting-plate screws to raise or lower the door vertically, and turn the front screw to adjust the side-to-side gap.
Safety
Always anchor this ENHET mirror wall cabinet securely to the wall at eye level (about 145 cm to the top bracket holes) using both included 106989 suspension brackets and wall fixings suited to your wall. Have two people lift and hold the cabinet while fixing it.
About this guide
The part numbers and counts match IKEA's assembly instructions, so you can check each piece against your box. The outer size, 60 × 17 × 75 cm, is IKEA's published size. Panel thicknesses, rear groove setback and hole positions are our own estimates from IKEA’s assembly drawings. The 3D runs faster than real hands do.
Includes two adjustable interior shelves and a full-height mirror door on 3-way adjustable soft-close hinges; can be hung to open left or right.
The manufacturer's instructions are on IKEA's product page (PDF). If something here differs from the manual in your box, follow the manual.
The 3D models, drawings and text are our own. IKEA and ENHET are named only to say which product this guide is for.