Step by step FROSTAstool
Step3/3
Hardware in0/12
Parts in0/5
Open IKEA PDF ↗
Turn the stool overstep 3 of 3 · manual page 3

iFlatpack.com is an independent platform creating original 3D procedural instructions. We are not affiliated with, endorsed by, or sponsored by Inter IKEA Systems B.V. or any other brand mentioned. All product names and part numbers are used strictly for identification and compatibility purposes.

Step 3 of 3 · IKEA manual page 3

FROSTA stool step 3 of 3: Turn the stool over

Turn the stool over and stand it on its legs. IKEA advises tightening the bolts again with the hex key about two weeks after assembly, and checking them now and then.

Tools: none, just your hands

All 3 steps

  1. 1Bolt on the first leg common mistake
  2. 2Bolt on the other three legs
  3. 3Turn the stool over

Parts and hardware checklist

1×Seatabout 35×35×2.2 cm
4×Legabout 42.8×18.4×3.6 cm
1×Hex key#100006 · 3 mm
12×Boltno number in the manual

Tools you need

None: it goes together by hand.

Questions

What tools do I need for the FROSTA stool?

Only the hex key (100006) that comes in the box.

How many bolts does each leg take?

Three: 12 in all, through the end of each bent leg into the threaded inserts under the seat.

A bolt will not go in. What do I do?

Loosen the leg’s other bolts, line the leg up on its holes, turn all three in by hand first, and only then tighten them with the hex key.

A leg wobbles. What do I do?

Tighten its three bolts with the hex key, and check them now and then.

How much weight does the FROSTA stool hold?

IKEA tested it for 100 kg.

Safety

IKEA says: for more stability, tighten the bolts again about two weeks after assembly, and whenever they work loose. The stool is tested for home use, to EN 12520 and EN 1022.

About this guide

The steps, the part numbers, the counts and the order come from IKEA's assembly manual AA-1131405-1 (2008). The outer size, 42 × 42 × 45 cm, is IKEA's published size. The height, the seat’s size and the 42 cm across the legs are IKEA’s, the hex key’s size a spare-parts seller’s; the seat’s thickness, the legs’ sections and where the holes are, are read off the manual’s drawings, so they are close, not measured. The 3D runs faster than real hands do.

IKEA tested the stool for 100 kg.

The manufacturer's instructions are in IKEA's assembly manual (PDF; the product is no longer sold). If something here differs from the manual in your box, follow the manual.

The 3D models, drawings and text are our own. IKEA and FROSTA are named only to say which product this guide is for.